Brand New Hercules Tandem Axle A double
Trailers -
VOLUME: 51 cubic metres.
DIMENSIONS: 8920 x 2420 x 2300mm approximately internally.
LONGMEMBERS: Hercules extruded one piece sections.
FIXED SIDES: 5mm high tensile with extruded splash guards, corners and top rails.
(top rails will be huck bolted)(front and side sheets wrapped in white)
DECALS: Hercules decals with pin stripes in top rails and lower corners.
FLOORS: 6mm high tensile.
FRONTS: 5mm high material with extruded round corners, with 2 wheel submarine
door fitted (location to be discussed)
TAILGATE: Rear hinged, over centre manual control bottom opening with 3 locking dogs,
air operated with switch at rear.
GRAIN DOOR: Yes, wide mouth with removable chute.
GRAIN LOCKS: Yes, one set in rear posts.
TARPS & BOWS: Manual Red PVC roll tarp with fibre glass hoods and flex bows, manual handle
SUBFRAME: Fabricated 6mm P-Beams with 150x16mm bottom flanges.
HOIST: Delta Well mounted type of 35 tonne capacity.
REAR LIGHTS: LED tail lights in rear aluminium quartergaurds with reverse lights and buzzer
with additional lights in panels on tailgate, with work lights underneath panels.
SIDE LIGHTS: 27 x LED side lights per side with centre indicator.
MUDFLAPS: Hercules fitted to front and rear.
MUDGUARDS: Full plastic type over rear tandem, with chrome inserts.
PAINTING: Subframes sandblasted, primed and finished in 2-Pack paint. (aluminium
natural) (Bright Red)
TYRES: 8 off 11R 22.5 Haulmax ATT202.
RIMS: 8 off 8.25 x 22.5 10-285 Alcoa, all LVL-1.
AXLES: 2 off Hendrickson drum brake type with 10 x 285PCD grease filled hubs with EBS sensors on one axle and automatic slack adjusters on both axles.
SUSPENSIONS: Hendrickson Intrax series vertical mount HD shock absorbers
with sealed air bags.
BRAKES: Air Brake Corp multivolt EBS. to comply with all Australian Design Rules.
LANDING LEGS: Dual manual two speed wind down type.
KING PIN: 50mm demountable with removable block.
SKID PLATE: 12mm full width reinforced plate.
DIVERTER VALVE: Yes, Manual on side of chassis.
YARD RELEASE: No.
RAISE LOWER: No.
LOAD GUAGE: Yes, standard air guage in front of rear group.
TOOLBOX: Yes aluminium fitted to chassis.
WATER TANK: Yes stainless round fitted to chassis.
SPARE WHEEL CARRIER: Yes single under chassis.
COUPLINGS: PBR M&F Bayonet air fittings, 7 pin electrical base, EBS base and Tema 10000
male hydraulic coupling at front of skid plate.
TOWBAR/COUPLING I-Beam type with 303 AUD Ringfeeder, safety chain lugs, 7 pin electrical base.
EBS base, M&F Bayonet air fittings and Tema 10000 male hydraulic coupling.
STANDARD EQUIPMENT: Shovel racks, spreader chains, fold down ladders, safety props and regulation rear markers.
Dolly -
SUBFRAME: Hercules heavy duty fabricated beam.
DRAWBAR: "A" frame with a 50mm weld on Ringfeder eye, complete with male and female bayonet air fittings, 7 pin electric plug, wind down leg.
SUSPENSION: Hendrickson Intrax with sealed air bags.
AXLES: 4 off Hendrickson drum brake type with 10 x 285 PCD grease filled hubs with 420 x 180 brake drums second and fourth axle with ABS sensors and automatic slack adjusters on all axles.
TYRES: 8 off 11R22.5 Haulmax ATT202.
RIMS: 8 off 8.25 x 22.5 10-285 Alcoa, all LVL-1.
BRAKES: Air Brake Corp multi volt EBS with roll stability system to comply with
all Australian Design Rules.
TURNTABLE: Jost JSK37 Greaseless.
LOAD GUAGE: Yes, on front dolly frame.
PAINTING: Subframe sandblasted, primed and finished in 2-Pack Paint.
MUDFLAPS: Hercules where applicable.
MUDGUARDS: Full plastic over tandem group, with chrome inserts.
REAR LIGHTS: LED type tail lights in rear pressing with reverse and number plate lights.
STANDARD EQUIPMENT: Aluminium checker plate front & rear of turntable, Regulation rear markers.
LEVEL 2/3 ACCESS ONLY - 65.0t at GML
- 67.0t at CML
- 67.0t at HML
SPECIFIC APPROVED ROUTES - 72.5t at GML
- 74.5t at CML
- 74.5t at HML

$361,400 plus GST for the combination plus registration.
PBS application costs are included in pricing.